*Planning*
In Planning, we made paper patterns and then cut out the patterns and used them to cut out the dinghy parts
The Model
Frame 1
|
77 mm |
|
105 mm |
|
43.5 mm |
Frame 2
|
105 mm |
|
128 mm |
|
39 mm |
Transom
Timber Sizes
Keel 360 x 10 x 2 (mm)
Chines 360 x 3 x 2 (mm)
Clamps 360 x 3 x 2 (mm)
Battens 360 x 3 x 2 (mm)
Description
We will make the model by setting up a form and then attaching the 2 frames, the stem and the transom to it. Then we attach the keel, chines, clamps and battens. Next we attach the sides and the bottom. Then we attach the seats and the mast bench. Finally, we make the mast and step it into the boat. Then we give it 2 coats of Estapol.
|
What I will do ? |
I will build a model. The model will be one tenth (0.1) of the original size (3.6 m) |
|
How I will build the model ? |
I will build the model upside down on a Form. Then I will turn it right side up to put in the seats and mast bench . |
|
How much have I done ? |
|
|
What else do I need to do ? |
|
|
When will I finish ? |
Date |
|
What have been the problems? |
|
|
Am I happy with my Progress |
|
|
|
My name is kalani |
|
|
This is Jennifer and manger building they boat. |
|
|
This is Innis and Tehana building they boat. |
|
|
This lime and lolene they are building a boat. |
|
|
This is my boat |
|
|
This the boats. |
|
|
This is tehana and innes boat |
